Home Understanding audio routing in linux
Reply: 0

Understanding audio routing in linux

user1581
1#
user1581 Published in June 20, 2018, 12:01 am

I have a custom i.MX6 board which has WM8985 audio codec. I have the codec driver wm8985 in sound/soc/codecs folder. I am developing the machine level driver sound/soc/fsl/imx-wm8985.c

I am taking the wm8962 code as reference. I am unable to understand the audio routing concept in linux audio subsystem.

I have modified the device tree to the following looking at wm8962 device tree.

   sound {
                compatible = "fsl,imx6q-sabresd-wm8985",
                           "fsl,imx-audio-wm8985";
                model = "wm8985-audio";
                cpu-dai = <&ssi2>;
                audio-codec = <&codec>;
                audio-routing =
                        "Headphone Jack", "HPL",
                        "Headphone Jack", "HPR",
                        "Ext Spk", "SPKL",
                        "Ext Spk", "SPKR",
                        "Mic Bias", "AMIC",
                        "RIN", "Mic Bias",
                        "DMIC", "Mic Bias",
                        "DMICDAT", "DMIC";
                mux-int-port = <2>;
                mux-ext-port = <3>;
                hp-det-gpios = <&gpio7 8 1>; /* same as sabre */
                /*mic-det-gpios = <&gpio1 23 1>;*/ /* move to enet_ref_clk */
        };

Is this correct. Can you please help me to understanding what does the source and sink means in this. How to make a route..

Running aplay, i am getting Read/Write Error which happens due to incorrect routing..

You need to login account before you can post.

About| Privacy statement| Terms of Service| Advertising| Contact us| Help| Sitemap|
Processed in 0.314631 second(s) , Gzip On .

© 2016 Powered by mzan.com design MATCHINFO